ZAGG InvisibleShield EZ Apply Installation for Fusion and Hybrid Screen Protection

Today’s guide will walk you through installing Invisible Shield Fusion Screen Protection using our new easy-to-use apply method. This method provides a convenient and efficient way to establish your screen protector without fuss. In the box, you’ll find all the materials you need to get started, including a wet wipe, microfiber cleaning cloth, squeegee, and dust removal sticker. With clear installation instructions and a limited lifetime warranty, you can trust that your device will be well-protected in no time. Let’s begin the installation process.

If you want to experience better after-sales service from ZAGG, please go to the official website of ZAGG, zagg.com/register.

Easily installing Invisible Shield Fusion Screen Protection using a new easy-apply method

In the box, you’ll find a paper envelope containing the screen protector and a second paper envelope containing all the necessary installation materials, including a wet wipe for cleaning the screen, a microfiber cleaning cloth, a squeegee for application, and a dust removal sticker. The installation instructions are printed outside the envelope containing the screen protector. And information on the limited lifetime warranty can be found on the inside. Let’s begin the installation process.

Step-by-step guide on installing Invisible Shield screen protection

Before installing your Invisible Shield, it’s essential to clean your screen thoroughly to ensure a smooth installation process. Start by using the wet wipe to remove any smudges and oils. Follow up with the microfiber cloth to ensure the screen is immaculate. Finally, use the dust removal sticker to pick up any debris that may have settled back on the net. Once your screen is clean and debris-free, you can install your Invisible Shield.

Begin by placing the easy-apply tray on a flat surface with the pegs pointing up. Set your phone in the tray, ensuring the top of your phone is at the end of the tray marked “top.” Next, pick up the screen protector and peel away the protective backing using the tab marked “number one.” Ensure the screen protector is facing down and not touching the exposed surface.

To install the screen protector, place it on the easy-apply tray by fitting the cutouts on each tab over the corresponding pegs on the tray. The exposed adhesive side should be facing down towards the face of your phone screen. The tray holds the Invisible Shield just above the screen, allowing you to position it correctly before applying it.

To apply the Invisible Shield, run your fingers across the phone’s width in one quick motion to anchor the Invisible Shield in place, starting at the center of the screen. Use firm and even pressure to ensure the screen protector is securely in place.

Smoothly Installing and Finishing your Invisible Shield Screen Protector

To ensure a smooth installation of your Invisible Shield Screen Protector, start by running the squeegee to the top of the phone in one smooth motion. Then, start at the center of the screen again. Run the squeegee down the rest of the phone in one smooth motion. Carefully peel away the top protective liner, and remove your phone from the easy-apply tray. Use the squeegee to smooth down the sides of the invisible shield, moving the squeegee in one smooth motion. Please do not move it back and forth, as this can cause bubbles.

Once the installation is finished, use the microfiber cloth to clean the Invisible Shield of any fingerprints, dust, or debris that may have accumulated during the installation process. After installing your Invisible Shield Screen Protector for best results, set up or reset your fingerprint scanner. Now, you’ve got powerful protection that gives you peace of mind.

Conclusion

Installing Zagg Invisible Shield Fusion Screen Protection is simple with the new easy application method. By following the step-by-step instructions, you can ensure that your screen protector is securely in place and provides maximum protection for your device. Remember to properly clean your screen before installing, use the squeegee in one smooth motion, and use the microfiber cloth to clean the invisible shield after installation. With your Invisible Shield screen protector in place, you can have peace of mind knowing your device is protected from scratches and other damage.